Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

30 Fabric OS Command Reference

53-1001764-01

2 0x6d0c00 20:0c:00:05:1e:37:11:aa 1 0 10.32.74.109 10;11;

3 0x6d0d00 20:0d:00:05:1e:37:11:aa 0 1 10.32.74.109 12;13;

-----------------------------------------------------------

F_Port information :

Port PortID Attached PWWN N_Port Preferred login

N_port exceeded?

----------------------------------------------------------

4 0x6d0a01 21:00:00:e0:8b:83:e3:cd 0 2 no

5 0x6d0a02 21:01:00:e0:8b:a3:e3:cd 0 2 no

6 0x6d0a03 21:00:00:e0:8b:83:3e:ce 0 2 no

7 0x6d0b01 21:01:00:e0:8b:a3:3e:ce 1 3 no

8 0x6d0b02 21:00:00:e0:8b:83:5c:cd 1 3 no

9 0x6d0b03 21:01:00:e0:8b:a3:5c:cd 1 3 no

10 0x6d0c02 10:00:00:06:2b:0a:a3:93 2 0 no

11 0x6d0c01 10:00:00:06:2b:0a:a3:92 2 0 no

12 0x6d0d02 10:00:00:06:2b:0a:a3:91 3 1

13 0x6d0d01 10:00:00:06:2b:0a:a3:90 3 1

---------------------------------------------------------

To display the current Access Gateway mode:

switch:admin> ag --modeshow

Access Gateway mode is enabled.

switch:admin> ag --modeshow

Access Gateway mode is NOT enabled.

AG group policy commands

To show current policies:

switch:admin> ag --policyshow

AG Policy Policy Name State

-----------------------------------------------------

Port Grouping pg Enabled

Auto Port Configuration auto Disabled

Advanced Device Security ads Disabled

WWN Based Load Balancing wwnloadbalance Disabled

-----------------------------------------------------

To enable a port grouping policy:

switch:admin> ag --policyenable pg

To disable a port grouping policy

switch:admin> ag --policydisable pg

To enable auto port configuration policy when both policies are disabled and the switch is already

disabled:

switch:admin> ag --policyenable auto

All Port related Access Gateway configurations will be lost.

Please save the current configuration using configupload.

Do you want to continue? (yes, y, no, n): [no] y