Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

Fabric OS Command Reference 627
53-1001764-01
portCfg
22
To modify the default VC QoS map settings for VC 1:
switch:admin> portcfg fciptunnel ge1 qosmap 1 3 -Q 29
switch:admin> portcfg fciptunnel ge1 qosmap 1 3 -Q 28 -P 7
switch:admin> portcfg fciptunnel ge1 qosmap 1 3 -P 2
To return the VC QoS map settings to default values:
switch:admin> portcfg fciptunnel ge1 qosmap 1 -default
To create an FCIP tunnel with a minimum retransmission time of 20 ms, a VLAN ID of 100, and an L2
CoS priority setting of 7:
switch:admin> portcfg fciptunnel 8/ge0 create \
1 192.168.10.1 192.168.20.1 0 -m 20 \
-v 100 -p 3 -P 7
Operation Succeeded
To create an FCIP tunnel with FastWrite and read/write Tape Pipelining enabled:
switch:admin> portcfg fciptunnel 3/ge0 create 6 \
10.1.1.44 192.168.131.124 155000 -f -t
To enable FCIP FastWrite and read/write Tape Pipelining on an existing tunnel:
switch:admin> portcfg fciptunnel ge1 modify 0 -f 1
To create an FCIP tunnel with Byte Streaming enabled:
switch:admin> portcfg fciptunnel geo create 1 \
172.68.100.88 192.168.200.108 0 -f1 -bstr
To disable Byte Streaming on an existing tunnel:
switch:admin> portcfg fciptunnel ge0 modify 1-bstr 0
To configure an FCIP Tunnel 1 with FICON XRC and FICON write Tape Pipelining emulation features
enabled using all default parameter arguments:
switch:admin> portcfg ficon ge0 1 -x 1 -w 1
SEE ALSO portCfgShow, portCmd, portShow, switchShow, configure