Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

776 Fabric OS Command Reference
53-1001764-01
portShow
22
• portShow fcipcircuit - Displays status and configuration for FCIP circuits:
- TCP statistics for the circuit
- Circuit-level VLAN tagging configuration
- Circuit-level Differentiated Services (DSCP) markings
• portshow mgmtif - Displays the inband management interfaces.
• portshow mgmtroute- Displays the routes for the inband management interfaces.
• portShow xtun - Displays FICON and FCP emulation statistics and current runtime conditions.
OPERANDS This command has the following operands:
slot
For bladed systems only, specifies the slot number of the VE_Port to be
displayed, followed by a slash (/).
ve_port
Displays information for a single specified FCIP tunnel. On the Brocade
7800/FX8-24, specify the VE_Port number associated with the tunnel configured
on one of the GbE ports. VE_Ports are numbered 16-23 on the Brocade 7800 and
12-31 on the Brocade FX8-24 blade.
all
Displays information for all configured FCIP tunnels.
fciptunnel
Displays configuration and status per FCIP tunnel. The following operands are
supported with fciptunnel and fcipcircuit.
-c | --circuit
Displays the FCIP circuits within the tunnel. This operand can be used with any
other operand to include circuit displays.
-t | --tcp
Displays the TCP statistics for the circuit. The -c option must be specified with this
option.
-p | --perf
Displays additional performance information for the specified FCIP tunnels.
-q | --qos
Displays the QoS statistics including performance for each priority. This operand
is optional with the --perf option.
-i | --ipsec
Displays IPSec status (enabled or disabled) and key if enabled. If IPSec is
enabled and configured in legacy mode, the mode information is displayed in
parenthesis. This option is valid for portShow fciptunnel only.
-h | --hier
Displays the FCIP tunnel hierarchy listing basic circuit IDs and TCP connection
information for the tunnel.
-s | --summary
Displays a summary view of the tunnel configuration parameters for a specific
VE_Port. You can use the summary option with the -perf and the - qos option.
When used with the -perf option, the summary option forces the --circuit option.
Flags indicate ipsec-configured tunnels, legacy ipsec tunnels, and compression
mode. Circuit flags indicate vlan tagging, crossport configuration, and ipv4 or ipv6
configuration.