FW 07.01.02/HAFM SW 08.06.00 HP StorageWorks HA-Fabric Manager Release Notes (AA-RUR6G-TE, August 2005)

Workaround
If the date/time of t
he HAFM appliance needs to be set to an e arlier time, perform
the following:
1. Exit the HAFM application.
2. Select Star t > Prog
rams > HP StorageWorks ha-fabric manager 8.6 > Stop
Services.
3. Chang e the date/time on the HAFM appliance.
4. Select Start > Programs > HP StorageWorks ha-fabric manager 8.6 > Start
Services.
5. Restart the HAFM application.
This procedure works even if you previously set the date/tim e to an earlier tim e without
using these ste
ps. Rebooting the HAFM appliance will also clear up this problem.
Exiting the HAFM application or rebooting the HAFM appliance has no impact on
the operations of the directors or edge switches and does not cause a disruption to
fabric operations.
HAFM installation not correctly cancelled by ESC key or Space bar
During the HAFM application installation, the ESC key does not function to cancel the
installation. The Space bar works only once to cancel the installation process.
Workaround
None. If the
installation is not desired, allow the installation to complete and then
uninstall the application.
Performance g raphs ina ccurate for time period when HAFM appliance is shut
down
If the HA FM appliance has been shut down or the HA FM application and Services have
been stopped, after restarting the performance g raphs continue and draw a flat line
from the stop point to the new start point. This indicates a level of per formance during
the down time but it is actually unknown. The reporting is inac curate for that portion
of the graph.
FL Ports do not show destination icon or destination port in performance graphs
FL Ports do not show destination switch icon or destination port in per formance graphs.
This is
because there ca n be up to 127 devices on a loop port, and they cannot be
displayed in the space in the tables.
HA-Fabric Manager release notes
23