Disk Hardware Component Replacement Instructions

disk replacement
hp surestore
virtual arrays
and
disk systems
Manufacturing Part Number
*A6191-96003*
CAUTION
Parts can be damaged by electrostatic discharge. Use proper ESD protection.
Your specific system's configuration may affect the disk replacement procedures. Please go to
to find system and configuration specific disk replacement procedures.
Failure to do so may result in data loss or system down time.
http://www.hp.com/support/storage_self_repair
over
Copyright © 2002 Hewlett-Packard Company
Printed in U.S.A 08/02
www.hp.com/support/VA7400
Inspect the contents of the kit.
1
Push down release tab, pull up lever on the disk to be replaced.
CAUTION
Wait 15 seconds before pulling the disk
from slot.
Spinning disks generate gyroscopic force.
Wait for the disk to stop before removing it
from the product.
CAUTION
Disk modules are fragile. Handle carefully.
When removing the replacement disk module from its
ESDbag,becarefultograspthediskmoduleby
its extraction handle.
Touching the disk circuit board can cause high energy
discharge and permanently damage the disk.
3
2 4

Summary of content (2 pages)