Disk Hardware Component Replacement Instructions

7
9
CAUTION
DO NOT leave slot empty for
morethat5minutes,asproper
cooling/airflow depends on all slots
being full.
Push down release tab, pull up lever on replacement disk.
Push down lever on new disk module until it clicks into place.
LED activity will occur. Y
our specific system's configuration will
affect the LED activity. Please go to:
to find system and configuration specific disk replacement
procedures.
http://www.hp.com/support/storage_self_repair
CAUTION
If the empty slot can not be filled
with a new disk within 5 minutes,
use a disk filler panel.
Pull disk module from slot.
5
6
8
Slide the replacement disk module, capacity label up, into the
empty slot.
10
1
2