HP StorageWorks EFS WAN Accelerator 3.0.12 release notes (AG421-96009, April 2009)

If you upgrade to v3.0 and clear the data store while running v3.0, you will not be able to downgrade

to a previous version of the software without clearing the data store again.

Upgrading from version 3.0.4e to 3.0.12

If upgrading a 3010 or 5010 from WA 3.0.4e, you will need to run the following from the

command-line interface before you can upgrade the device:

_exec ln -s /dev/cciss/c0d0 /dev/cciss/c0d0p

For example:

HP StorageWorks EFS WAN Accelerator

admin@wa-55's password:

Last login: Fri Jun 15 19:02:16 2007 from 10.0.10.1

wa-55 > enable

wa-55 # _exec ln -s /dev/cciss/c0d0 /dev/cciss/c0d0p

wa-55 #

Miscellaneous issues

SNMP configuration

The HP EFS WAN Accelerator Manager has two graphical user interfaces; one for WAN Accelerator

management and general system management (the Management Console), and the other for the HP

System Management Homepage. Use the Management Console or the command-line interface to

modify SNMP settings, rather than the System Management Homepage. To change the read-write

community string, use the snmp-server rwcommunity CLI command.

NOTE:

The read-write community string must be different from the read-only community string for proper

functioning of the System Management Homepage.

Setting the system date/time

When setting the system date/time in the web-based GUI, if the date and time is significantly off when

set to the current date and time, the GUI will log the user off. Should this occur, log back in, and the

date is now correct. You can then set the time.

Refreshing web GUI pages

When configuring items through the web GUI, at times a browser error may be returned stating Page

not found. When this occurs, click the Refresh button in the web browser, and the page often returns

correctly.