HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 Command-Line Interface reference manual (June 2006)

40 3 - ENABLE-MODE COMMANDS
show in-path oop-all-port
Description Displays ports for failover deployments using PBR with CDP to redirect traffic to the
backup HP EFS WAN Accelerator.
Syntax show in-path oop-all-port
Parameters None
Example
minna (config) # show in-path oop-all-port
L4/PBR/WCCP on all interfaces: no
minna #
show in-path peering rules
Description Displays current in-path peering rules for serial cluster deployments.
Syntax show in-path peering rules
Parameters None
Example
minna (config) # show in-path peering rules
Rule Type Source Network Dest Network Port Peer Addr
----- ------ ------------------ ------------------ ----- -------------
1 pass * * * 10.0.1.3
2 pass * * * 10.0.1.
def auto * * * *
show in-path rules
Description Displays current in-path rules and Virtual Local Area Network (VLAN) identification
numbers.
Syntax show in-path rules
Parameters None
Example
minna (config) # show in-path rules
Rule Type O N VLAN Source Addr Dest Addr Port
----- ---- - - ---- ------------------ ------------------ -------------
1 pass - - all all all Secure
2 pass - - all all all Interactive
def auto F A all all all all
-----------------------------------------------------------------------
2 user added rule(s)
(O) Optimization Policy: F=Full S=SDR-Only C=Compr-Only N=None
(N) Neural Framing: N=Never A=Always T=TCP Hints D=Dynamic
show interfaces
Description Displays the running state settings (which might be different due to Dynamic Host
Configuration Protocol (DHCP)) and statistics.