HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 Command-Line Interface reference manual (June 2006)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 45
3 - ENABLE-MODE COMMANDS
Parameters
Example
minna # show log
Dec 22 20:00:00 localhost /usr/sbin/crond[784]: (root) CMD (/usr/sbin/
logrotate /etc/logrotate.conf)
Dec 22 20:00:00 localhost cli[555]: [cli.INFO]: user admin: CLI got
signal 2 (SIGINT)
Dec 22 20:02:31 localhost cli[555]: [cli.INFO]: user admin: Executing
command: show ip route
Dec 22 20:02:38 localhost cli[555]: [cli.INFO]: user admin: CLI got
signal 2 (SIGINT)
Dec 22 20:03:16 localhost cli[555]: [cli.INFO]: user admin: CLI got
signal 2 (SIGINT)
Dec 22 20:04:00 localhost cli[555]: [cli.INFO]: user admin: Executing
command: show ip route static
Dec 22 20:05:02 localhost cli[555]: [cli.INFO]: user admin: Executing
command: show licenses
Dec 22 20:05:09 localhost cli[555]: [cli.INFO]: user admin: CLI got
signal 2 (SIGINT)
Dec 22 20:06:44 localhost cli[555]: [cli.INFO]: user admin: Executing
command: show limit bandwidth
Dec 22 20:06:49 localhost cli[555]: [cli.INFO]: user admin: CLI got
signal 2 (SIGINT)
Dec 22 20:07:12 localhost cli[555]: [cli.INFO]: user admin: Executing
command: show log
show logging
Description Displays log settings.
Syntax show logging
Parameters None
Example
minna # show logging
Local logging level: info
Default remote logging level: info
No remote syslog receivers configured.
Number of archived log files to keep: 10
Log rotation frequency: daily
minna #
show ntp
Description Displays Network Time Protocol (NTP) settings.
Syntax show ntp
Parameters None
continuous Displays the log continuously, similar to the tail -f command.
files <log number> Displays a list of log files or a specific log file.
matching Displays a list of matching log files.