HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 Command-Line Interface reference manual (June 2006)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 61
4 - CONFIGURATION-MODE
C
OMMANDS
 “file stats upload” on page 82
 “file tcpdump” on page 83
 “file tcpdump delete” on page 83
 “file tcpdump upload” on page 83
 “hardware upgrade model” on page 84
 “hostname” on page 84
 “hp agents restart” on page 84
 “hp agents start” on page 86
 “hp agents status” on page 87
 “hp agents stop” on page 88
 “image boot” on page 89
 “image delete” on page 89
 “image fetch” on page 89
 “image install” on page 90
 “image move” on page 90
 “in-path cdp enable” on page 90
 “in-path cdp holdtime” on page 91
 “in-path cdp interval” on page 91
 “in-path enable” on page 92
 “in-path interface enable” on page 92
 “in-path interface vlan tag” on page 92
 “in-path kickoff” on page 93
 “in-path neighbor enable” on page 93
 “in-path neighbor ip address” on page 94
 “in-path neighbor keepalive count” on page 94
 “in-path neighbor keepalive interval” on page 95
 “in-path neighbor port” on page 95
 “in-path oop all-port enable” on page 95
 “in-path oop enable” on page 96
 “in-path peering rule” on page 96
 “in-path peering move-rule” on page 97
 “in-path rule auto-discover” on page 97
 “in-path rule deny” on page 99
 “in-path rule discard” on page 99
 “in-path rule fixed-target” on page 100
 “in-path rule move” on page 102