HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 Command-Line Interface reference manual (June 2006)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 81

4 - CONFIGURATION-MODE

OMMANDS

Parameters

Example

minna (config) # failover buddy port 2515

minna (config) #

failover enable

Description Enables failover support. Failover support enables a failover (backup) HP EFS WAN

Accelerator so that if the master HP EFS WAN Accelerator fails, the traffic is routed

automatically through the failover (backup) HP EFS WAN Accelerator.

Valid values must exist for the port, buddy address, and buddy port before this

command can complete. The no command option disables failover support.

Syntax failover enable

Parameters None

Example

minna (config) # failover enable

minna (config) #

failover master

Description Sets this HP EFS WAN Accelerator as the primary or master HP EFS WAN

Accelerator. If the master HP EFS WAN Accelerator fails, the traffic is routed

automatically through the failover (backup) HP EFS WAN Accelerator. The default

value is true. The no command option sets this HP EFS WAN Accelerator as the

failover (backup) HP EFS WAN Accelerator.

Syntax failover master

Parameters None

Example

minna (config) # failover master

minna (config) #

failover port

Description Sets the local failover port. The failover HP EFS WAN Accelerator is the backup HP

EFS WAN Accelerator. The default value is 7820. The no command option resets the

local failover port to the default value.

Syntax failover port <port>

Parameters

<port> Specifies the port number.