HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 Management Console user guide (June 2006)

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 101
2 - CONFIGURING THE HP EFS
WAN A
CCELERATOR
3. Click SNMP Trap Receivers in the left menu to display the Setup: Reports - SNMP
Trap Receivers page.
Figure 2-41. Setup: Reports - SNMP Trap Receivers Page
4. Under Add New Trap Receiver, type the IP address for the SNMP trap in the
Receiver IP text box.
5. Type the SNMP community name in the Community text box.
6. Select v1 or v2c from the Type drop-down list to set the SNMP software version.
7. Select True or False from the Enabled drop-down list to enable or disable SNMP
traps.
8. Click Add Trap Receiver to apply the settings to the running configuration.
9. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.