HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 Release Notes (392363-004, June 2006)

SH1 (config) # no peer 0.0.0.0

SH1 (config) # no peer <WAN Accelerator-2 IP addr>

SH1 (config) # no peer <WAN Accelerator-3 IP addr>

SH1 (config) # no peer <WAN Accelerator-4 IP addr>

SH1 (config) # write memory

SH1 (config) # restart

7. On WAN Accelerator-2, at the system prompt, enter the following commands:

SH2 > enable

SH2 # configure terminal

SH2 (config) # no peer 0.0.0.0

SH2 (config) # no peer <WAN Accelerator-1 IP addr>

SH2 (config) # no peer <WAN Accelerator-3 IP addr>

SH2 (config) # no peer <WAN Accelerator-4 IP addr>

SH2 (config) # write memory

SH2 (config) # restart

8. On WAN Accelerator-3, at the system prompt, enter the following commands:

SH3 > enable

SH3 # configure terminal

SH3 (config) # no peer 0.0.0.0

SH3 (config) # no peer <WAN Accelerator-1 IP addr>

SH3 (config) # no peer <WAN Accelerator-2 IP addr>

SH3 (config) # no peer <WAN Accelerator-4 IP addr>

SH3 (config) # write memory

SH3 (config) # restart

9. On WAN Accelerator-4, at the system prompt, enter the following commands:

SH4 > enable

SH4 # configure terminal

SH4 (config) # no peer 0.0.0.0

SH4 (config) # no peer <WAN Accelerator-1 IP addr>

SH4 (config) # no peer <WAN Accelerator-2 IP addr>

SH4 (config) # no peer <WAN Accelerator-3 IP addr>

SH4 (config) # write memory

SH4 (config) # restart

IMPORTANT: If you are downgrading to a previous version of the HP EFS WAN Accelerator software,

you must downgrade to a version of the software that has previously run on your machine. For example,

you cannot upgrade from version 1.2.3 to version 2.0 or version 2.1 and downgrade to version 1.2.8. You

must downgrade to version 1.2.3. and then upgrade to version 1.2.8. If you do not follow this step, your

configuration will be discarded and unrecoverable.

TIP: Either go back to a previously installed revision, or save the text results of a

show running-configuration command before downgrading in a machine other than the HP EFS

WAN Accelerator, and apply it after the downgrade.