HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 Release Notes (392363-004, June 2006)

HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 release notes 11
Miscellaneous issues
Remote software re-imaging
You can not use the Integrated Lights Out (iLO) Virtual CD capability to restore the system software using
the Quick Restore CD. Insert the Quick Restore CD into the CD/DVD-ROM drive on the HP EFS WAN
Accelerator to restore the system software.
SATA software RAID configuration
If the SATA Software RAID BIOS field is enabled, the Quick Restore fails with an unrelated error. Set the
SATA Software RAID BIOS field to Disabled for the Quick Restore CD to function properly.
SNMP configuration
The HP EFS WAN Accelerator has two graphical user interfaces, one for acceleration and general system
management (the Management Console), and the other for the HP System Management Homepage. Use
the Management Console or the command-line interface to modify SNMP settings, rather than the System
Management Homepage. To change the read-write community string, use the snmp-server
rwcommunity CLI command.
NOTE: The read-write community string must be different from the read-only community string for proper
functioning of the System Management Homepage.
Console messages
The following messages may appear on the console of the WAN Accelerator:
[blockpoll/smp/linux26_blockpoll.c:391] partition starts at xxxxx (in sectors)
and size is xxxxx KB
program cmaided is using a deprecated SCSI ioctl, please convert it to SG_IO
u32 classifier
Performance counters on
OLD policer on
input device check on
These messages are informational only, and can be safely ignored.
Synchronization with Standalone PFS shares
Synchronization with a Standalone PFS share may not work correctly. If using Standalone shares and
synchronization, verify that it is working properly, or choose a different type of PFS share when using
synchronization.
Setting the system date/time
When setting the system date/time in the web based GUI, if the date and time is significantly off, when set
to the current date and time, the GUI will log the user off. If this occurs, log back in, and the date will have
been set correctly, you can now set the time.
Refreshing web GUI pages
When configuring items through the web GUI, at times a browser error may be returned saying, “Page
not found.” When this occurs, press the Refresh button in the web browser, and the page often returns
correctly.