HP StorageWorks Enterprise File Services WAN Accelerator 2.1.7 Command-Line Interface Reference Manual (392361-004, June 2006)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 121
4 - CONFIGURATION-MODE
C
OMMANDS
Parameters
Example
minna (config) # ntp server 10.10.10.1
minna (config) #
out-of-path enable
Description Enables an out-of-path configuration. The default value is false. The no command
option disables out-of-path configuration.
Syntax out-of-path enable
Parameters None
Example
minna (config) # out-of-path enable
minna (config) #
peer
Description Configures minimum and maximum protocol version. The no command option
removes the protocol version.
Syntax peer <P addr> version [min <version> | max <version>]
Parameters
Usage Recent software enhancements required to the intercommunication protocols made
2.0 incompatible with version 1.2. To remedy this situation, version 2.1 of the HP
EFS WAN Accelerator supports both the new intercommunication protocols as well
as the 1.2 intercommunication protocols.
<addr> Specifies the NTP server to synchronize with.
version <number> Specifies the version number for NTP. You do not need to specify the
version number for the no ntp server command.
<IP addr> Specifies the in-path or out-of-path (or both) HP EFS WAN
Accelerator.
min <version> Specifies the protocol version number: 5 or 6.
max <version> Specifies the protocol version number: 5 or 6.