HP StorageWorks Enterprise File Services WAN Accelerator 2.1.7 Command-Line Interface Reference Manual (392361-004, June 2006)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 147
4 - CONFIGURATION-MODE
C
OMMANDS
Parameters
Example
minna (config) # radius-server timeout 30
minna (config) #
reset factory reload
Description Resets system to factory defaults and reboots the system.
Syntax reset factory reload
Parameters None
Example
minna (config) # reset factory reload
minna (config) #
segstore receive port
Description Receives the data store from another HP EFS WAN Accelerator. The failover HP EFS
WAN Accelerator must be the same model. You cannot preload a data store on a non-
failover HP EFS WAN Accelerator.
Syntax segstore receive port <port>
Parameters
Example
minna (config) # segstore receive port 20
minna (config) #
segstore send addr
Description Sends the data store to another HP EFS WAN Accelerator. The other HP EFS WAN
Accelerator must be the same model. You cannot preload a data store on a non-
failover HP EFS WAN Accelerator.
Syntax segstore send addr <addr> [port <port>]
Parameters
Example
minna (config) # segstore send addr 10.10.10.1
minna (config) #
<seconds> Sets the timeout for retransmitting a request to any RADIUS
server. The range is 1-60. The default value is 3.
<port> Specifies the port number.
<addr> Specifies the IP address.
port <port> Specifies the port number.