HP StorageWorks Enterprise File Services WAN Accelerator 2.1.7 Command-Line Interface Reference Manual (392361-004, June 2006)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 149
4 - CONFIGURATION-MODE
C
OMMANDS
service default-port
Description Sets the default service port you want to use for connection pooling.
Syntax service default-port <port>
Parameters
Example
minna (config) # service default-port 7800
minna (config) #
service enable
Description Starts the HP EFS WAN Accelerator service. The no command option disables the
HP EFS WAN Accelerator service (that is, it disables all the configured in-path IP
addresses and ports and you lose your connection to the HP EFS WAN Accelerator
Manager).
Syntax service enable
Parameters None
Example
minna (config) # service enable
minna (config) #
service error reset
Description Resets the HP EFS WAN Accelerator service after a service error.
Syntax service error reset
Parameters None
Example
minna (config) # service error reset
minna (config) #
service map-port
Description Sets a target port to service port mappings. Setting multiple service ports on inner
connections enables you to identify the type of traffic and apply QoS settings based
on a port. The no command option disables the service map.
For example, in an in-path deployment, CIFS and MAPI could be mapped to port 9800
and HTTP to port 9802. The you can configure the WAN router to tag packets for port
9800 with the same priority as for CIFS and MAPI, and those for port 9802, with the
same priority as HTTP.
<port> Specifies the new port.