HP StorageWorks Enterprise File Services WAN Accelerator 2.1.7 Command-Line Interface Reference Manual (392361-004, June 2006)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 189
B - HP EFS WAN
A
CCELERATOR PORTS
Commonly Optimized Ports
The HP EFS WAN Accelerator by default optimizes all ports. If you do not want the
HP EFS WAN Accelerator to optimize all ports for an in-path or out-of path
configuration, you can specify specific ports for optimization.
Although these ports can vary according to your requirements, the following ports are
commonly optimized and monitored for in-path and out-of-path configurations:
 21 (FTP)
 80 (HTTP)
 139 (CIFS:NETBIOS)
 445 (CIFS:TCP)
 1433 (SQL:TDS)
 7830 (MAPI)
Commonly Excluded Ports
This section summarizes the ports that are commonly excluded from optimization in
the HP EFS WAN Accelerator.
If you have multiple ports that you want to exclude, create a port label and list the ports.
For detailed information, see the HP EFS WAN Accelerator Management Console
User Guide.
Interactive Ports Forwarded by the HP EFS
WAN Accelerator
A default in-path rule with the port label Interactive is automatically created in your
system. This in-path rule automatically passes through traffic on interactive ports (for
example, Telnet, TCP ECHO, remote logging, and shell).
TIP: If you do not want to automatically forward these ports, simply delete the Interactive rule
in the Management Console. For detailed information, see the HP EFS WAN Accelerator
Management Console User Guide.
Application Ports
PolyComm
(video conferencing)
1503, 1720-1727, 3230-3253, 5060
Cisco IPTel 2000