HP StorageWorks Enterprise File Services WAN Accelerator 2.1.7 Command-Line Interface Reference Manual (392361-004, June 2006)

22 1 - USING THE COMMAND-LINE INTERFACE
Saving Configuration Changes
The show configuration running command displays the current configuration of the
system. When you make a configuration change to the system, the change becomes
part of the running configuration.
The change does not automatically become part of the configuration file in memory
until you write the file to memory. If you do not save your changes to memory, they
are lost when the system restarts.
To save all configuration changes to memory, you must enter the write memory
command while in enable-mode.