HP StorageWorks Enterprise File Services WAN Accelerator 2.1.7 Command-Line Interface Reference Manual (392361-004, June 2006)

42 3 - ENABLE-MODE COMMANDS
show in-path neighbor
Description Displays current connection forwarding settings. For detailed information, see “in-
path neighbor enable” on page 95.
Syntax show in-path neighbor
Parameters None
Example
minna # show in-path neighbor
Connection forwarding Enabled: no
Connection forwarding Port: 7850
Keepalive Count: 3
Keepalive Interval: 10
show in-path oop-all-port
Description Displays ports for failover deployments using PBR with CDP to redirect traffic to the
backup HP EFS WAN Accelerator.
Syntax show in-path oop-all-port
Parameters None
Example
minna (config) # show in-path oop-all-port
L4/PBR/WCCP on all interfaces: no
minna #
show in-path peering rules
Description Displays current in-path peering rules for serial cluster deployments.
Syntax show in-path peering rules
Parameters None
Example
minna (config) # show in-path peering rules
Rule Type Source Network Dest Network Port Peer Addr
----- ------ ------------------ ------------------ ----- -------------
1 pass * * * 10.0.1.3
2 pass * * * 10.0.1.
def auto * * * *
show in-path rules
Description Displays current in-path rules and Virtual Local Area Network (VLAN) identification
numbers.
Syntax show in-path rules
Parameters None