HP StorageWorks Enterprise File Services WAN Accelerator 2.1.7 Command-Line Interface Reference Manual (392361-004, June 2006)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 67
4 - CONFIGURATION-MODE
C
OMMANDS
 “file stats upload” on page 89
 “file tcpdump” on page 89
 “file tcpdump delete” on page 89
 “file tcpdump upload” on page 90
 “hardware ecc-mem-check enable” on page 90
 “hardware upgrade model” on page 90
 “hostname” on page 91
 “image boot” on page 91
 “image delete” on page 91
 “image fetch” on page 91
 “image install” on page 92
 “image move” on page 92
 “in-path cdp enable” on page 92
 “in-path cdp holdtime” on page 93
 “in-path cdp interval” on page 93
 “in-path enable” on page 94
 “in-path interface enable” on page 94
 “in-path interface vlan tag” on page 94
 “in-path kickoff” on page 95
 “in-path neighbor enable” on page 95
 “in-path neighbor ip address” on page 96
 “in-path neighbor keepalive count” on page 97
 “in-path neighbor keepalive interval” on page 97
 “in-path neighbor port” on page 97
 “in-path oop all-port enable” on page 97
 “in-path oop enable” on page 98
 “in-path peering rule” on page 98
 “in-path peering move-rule” on page 100
 “in-path rule auto-discover” on page 100
 “in-path rule deny” on page 102
 “in-path rule discard” on page 102
 “in-path rule fixed-target” on page 103
 “in-path rule move” on page 105
 “in-path rule pass-through” on page 105
 “in-path simplified routing” on page 105
 “interface” on page 106