HP StorageWorks Enterprise File Services WAN Accelerator 2.1.7 Command-Line Interface Reference Manual (392361-004, June 2006)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 71
4 - CONFIGURATION-MODE
C
OMMANDS
 “stats alarm linkstate enable” on page 156
 “stats chd” on page 156
 “stats clear-all” on page 157
 “stats export” on page 157
 “stats sample” on page 157
 “stats settings bandwidth” on page 158
 “tacacs-server host” on page 158
 “tacacs-server key” on page 159
 “tacacs-server retransmit” on page 160
 “tacacs-server timeout” on page 160
 “tcp connection send keep-alive” on page 160
 “tcp connection send reset” on page 161
 “tcp highspeed enable” on page 161
 “terminal” on page 162
 “username disable” on page 163
 “username nopassword” on page 163
 “username password” on page 163
 “username password 0” on page 164
 “username password 7” on page 164
 “wccp enable” on page 164
 “wccp mcast-ttl” on page 165
 “wccp service group” on page 165
 “web auto-logout” on page 167
 “web enable” on page 168
 “web http enable” on page 168
 “web http port” on page 168
 “web httpd listen enable” on page 168
 “web httpd listen interface” on page 169
 “web https enable” on page 169
 “web https port” on page 169
 “web prefs log lines” on page 170
 “web proxy host” on page 170
 “web session renewal” on page 170
 “web session timeout” on page 171
 “write memory” on page 171
 “write terminal” on page 171