HP StorageWorks Enterprise File Services WAN Accelerator 2.1.7 Command-Line Interface Reference Manual (392361-004, June 2006)

ManualsBrandsHP ManualsComputer AccessoriesHP StorageWorks DL320-1010 WAN Accelerator

78 4 - CONFIGURATION-MODE COMMANDS

configuration jump-start

Description Restarts the configuration wizard.

Syntax configuration jump-start

Parameters None

Example

minna (config) # configuration jump-start

Configuration wizard.

Step 1: Hostname? [telegraph]

Step 2: Use DHCP? [no]

Step 3: Primary IP address? [10.0.0.74]

Step 4: Netmask? [255.255.0.0]

Step 5: Default gateway? [10.0.0.1]

Step 6: Primary DNS server? [10.0.0.2]

Step 7: Domain name? [domain.com]”

Step 8: Admin password?

Step 9: Copy config from another site? [no]

Step 10: Set the primary interface speed? [auto]

Step 11: Set the primary interface duplex? [auto]

Step 12: Would you like to activate the in-path configuration? [no] y

Step 13: In-Path IP address? [0.0.0.0]

Step 14: In-Path Netmask? [0.0.0.0] 255.255.0.0

Step 15: In-Path Default gateway? [0.0.0.1]

Step 16: Set the in-path:LAN interface speed? [auto]

Step 17: Set the in-path:LAN interface duplex? [auto]

Step 18: Set the in-path:WAN interface speed? [auto]

Step 19: Set the in-path:WAN interface duplex? [auto]

You have entered the following information:

1. Hostname: minna

2. Use DHCP: no

3. Primary IP address: 10.0.0.74

4. Netmask: 255.255.0.0

5. Default gateway: 10.0.0.1

6. Primary DNS server: 10.0.0.2

7. Domain name: domain.com

8. Admin password: (unchanged)

9. Copy config from another site: no

10. Set the primary interface speed: auto

11. Set the primary interface duplex: auto

12. Would you like to activate the in-path configuration: yes

13. In-Path IP address: 0.0.0.0

14. In-Path Netmask: 255.255.0.0

15. In-Path Default gateway: 0.0.0.1

16. Set the in-path:LAN interface speed: auto

17. Set the in-path:LAN interface duplex: auto

18. Set the in-path:WAN interface speed: auto

19. Set the in-path:WAN interface duplex: auto

To change an answer, enter the step number to return to.

Otherwise hit <enter> to save changes and exit.

Choice:

configuration merge

Description Merges common configuration settings from one HP EFS WAN Accelerator to

another. Use the configuration merge command to deploy a network of appliances.

Set up a template HP EFS WAN Accelerator and merge the template with each HP

EFS WAN Accelerator in the network.