HP StorageWorks Enterprise File Services WAN Accelerator 2.1.7 Command-Line Interface Reference Manual (392361-004, June 2006)

82 4 - CONFIGURATION-MODE COMMANDS
datastore notification wrap-around
Description Sets the number of days to elapse before sending an email message notifying you that
the data in the data store has been replaced
. The no command option disables
notification wrap-around.
Syntax datastore notification wrap-around <days>
Parameters
Example
minna (config) # datastore notification wrap-around 2
minna (config) #
datastore receive port
Description Receives the data store from another HP EFS WAN Accelerator. Use this command
to populate (warm) a data store of a new appliance with the data on the existing
appliance. The appliance data stores must be the same size.
Syntax datastore receive port <port>
Parameters
Usage For example, on the new appliance:
datastore receive port 7600
On the existing appliance:
datastore send addr <primary IP address of new appliance> port 7600
Example minna (config) # datastore receive port 1234
minna (config) #
datastore send addr
Description Copies the data store to a remote HP EFS WAN Accelerator. Use this command to
populate (warm) a data store of a new appliance with the data on the existing
appliance. The appliance data stores must be the same size.
Syntax datastore send addr <addr> port <port>
wrap-around <days> Specifies the number of days to elapse before sending an email
message notifying you that the data in the data store has been
replaced.
<port> Specifies the port number.