HP StorageWorks Enterprise File Services WAN Accelerator 2.1.7 Command-Line Interface Reference Manual (392361-004, June 2006)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 97
4 - CONFIGURATION-MODE
C
OMMANDS
in-path neighbor keepalive count
Description Sets the keep-alive messages before terminating connections with the neighbor HP
EFS WAN Accelerator for TCP connection forwarding.
Syntax in-path keepalive count <count>
Parameters
Example
minna (config) # in-path neighbor keepalive count 10
minna (config) #
in-path neighbor keepalive interval
Description Sets the time interval between keep-alive messages with the neighbor HP EFS WAN
Accelerator for connection forwarding.
Syntax in-path keepalive interval <seconds>
Parameters
Example
minna (config) # in-path neighbor keepalive interval 10
minna (config) #
in-path neighbor port
Description Sets the neighbor port for the HP EFS WAN Accelerator in connection forwarding
deployments.
Syntax in-path neighbor <port>
Parameters
Example
minna (config) # in-path neighbor port 7850
minna (config) #
in-path oop all-port enable
Description Enables virtual in-path support on all ports for failover deployments with PBR and
CDP. The no command option disables support for all ports.
<count> Specifies the number of keep-alive messages. The default value is
3.
<seconds> Specifies the number of seconds between keep-alive messages.
The default value is 10.
<port> Specifies the neighbor HP EFS WAN Accelerator port. The
default value is 7850.