HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 deployment guide (AG421-96001, March 2007)

HP STORAGEWORKS ENTERPRISE FILE SERVICES WAN ACCELERATOR DEPLOYMENT GUIDE 41
4 - OUT-OF-PATH NETWORK
D
EPLOYMENTS
The following figure illustrates the client-side of the network where the HP EFS WAN
Accelerator is configured as both an in-path and out-of-path device.
Figure 4-6. Hybrid: In-Path and Out-of-Path Deployment
Basic Steps
(Client-Side)
Perform the following steps for the HP EFS WAN Accelerator.
1. Configure the HP EFS WAN Accelerator as an in-path and out-of-path device. For
detailed information, see the HP StorageWorks Enterprise File Services WAN
Accelerator Installation and Configuration Guide.
2. Connect to the Management Console to verify your configuration. For detailed
information, see the HP Enterprise File Services WAN Accelerator Management
Console User Guide.
3. Navigate to the Setup: Optimization Service - In-Path Rules page in the
Management Console.