HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Management Console user guide (AG421-96002, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 145
2 CONFIGURING THE HP EFS
WAN A
CCELERATOR
Rebooting the HP EFS WAN Accelerator
You can reboot the HP EFS WAN Accelerator in the Reboot Appliance page.
Rebooting the HP EFS WAN Accelerator disrupts existing network connections that
are currently proxied through the HP EFS WAN Accelerator.
Rebooting can take a few minutes.
To reboot the HP EFS
WAN Accelerator
1. Click the Setup tab to display the Setup menu.
2. Click Reboot Appliance to display the Reboot Appliance page.
Figure 2-68. Reboot Appliance Page
3. Click Reboot Appliance. After you click Reboot Appliance, you are logged out
of the system and it is rebooted
TIP: To remove data from the data store, click the Clean the Data Store on Reboot check box.
(You rarely need to clean the data store outside of a lab environment.)
Shutting Down the HP EFS WAN Accelerator
You can shut down the HP EFS WAN Accelerator in the Shutdown Appliance page.
When you shutdown the HP EFS WAN Accelerator, connections are broken and
optimization ceases.
Shutdown can take a few minutes.