HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Management Console user guide (AG421-96002, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 53
2 CONFIGURING THE HP EFS
WAN A
CCELERATOR
To set the primary
interface
1. Click the Setup tab to display the Setup menu.
2. Click Host Settings to display the Host Settings - Interface: Primary page.
Figure 2-15. Host Settings - Interface Primary Page
3. Use the controls to complete the configuration, as described in the following table.
Control Description
IP Address Obtain IP address automatically. Specify this option to automatically obtain the IP
address from a Dynamic Host Configuration Protocol DHCP server. (A DHCP server
must be available so that the HP EFS WAN Accelerator can request the IP address from
it.)
IMPORTANT: The primary and in-path interfaces can share the same subnet. The
primary and auxiliary interfaces cannot share the same network subnet.
Specify IP Address Manually. Specify this option if you do not use a DHCP server to
set the IP address. Specify the following settings:
• IP Address. Specify an IP address.
• Subnet Mask. Specify a subnet mask.
• Primary Gateway. Specify the primary gateway IP address. The primary gateway
must be in the same network as the primary interface. You must set the primary
gateway for in-path configurations.