HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Management Console user guide (AG421-96002, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 69
2 CONFIGURING THE HP EFS
WAN A
CCELERATOR
To enable connection
forwarding
1. Click the Setup tab to display the Setup menu.
2. Click Advanced Networking to expand the Advanced Networking menu and
display the Advanced Networking -Connection Forwarding page.
Figure 2-26. Advanced Networking - Connection Forwarding Page
3. Use the controls to complete the configuration, as described in the following table.
Control Description
General Enable Connection Forwarding. Specify this option to enable connection forwarding
by default on all neighbors added to the peer list. The default port for connection
forwarding is 7850.
Port. Specify the port number to use as the default for neighbor appliance in-path port.
The default is 7850.
Keep-Alive Interval. Specify the number of seconds to use as the default interval for
ping commands between neighbor appliances.
Keep-Alive Count. Specify the number of tries to use as the default number of failed
ping attempts before an appliance terminates a connection with a neighbor. The default
value is 3.
Apply. Click Apply to apply them to entries in the peer list.