HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Management Console user guide (AG421-96002, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 95
2 CONFIGURING THE HP EFS
WAN A
CCELERATOR
To enable a WCCP
service group
1. Click the Setup tab to display the Setup menu.
2. Click Advanced Networking to expand the Advanced Networking menu.
3. Click WCCP Groups to display the Advanced Networking - WCCP Service
Groups page.
Figure 2-37. Advanced Networking - WCCP Service Groups Page
4. Use the controls to complete the configuration, as described in the following table.
Control Description
General Enable WCCP v2 Support. Select this box to enable WCCP v2 support on all groups
added to the Service Group list.
Multicast TTL. Specify the TTL boundary for the WCCP protocol packets. The default
value is 5.
Apply. Click Apply to apply your settings to the running configuration.