Manualshelf

DCFM Enterprise User Manual (53-1001775-01, June 2010)

ManualsBrandsHP ManualsStorageHP StorageWorks Edge Switch 2/12
131132133134135136137138139140
DCFM Enterprise User Manual 97
53-1001775-01
Memory allocation
3
Memory allocation
You can configure memory allocation for the client and server to improve performance. You can
trigger switch polling when a state changes or you can poll at intervals when no state change
occurs.
NOTE
SAN size is a consideration in selection of polling periods.
Configuring memory allocation settings
To configure memory allocation settings, complete the following steps.
1. Select Server > Options.
The Options dialog box displays (Figure 44).
2. Select Memory Allocation in the Category list to set the memory allocation for the server and
client.
FIGURE 44 Options dialog box (Memory Allocation option)
3. Select the size of the SAN (small, medium, or large) you want to configure in the Current SAN
Size is list.
Memory and asset polling values change to the new default values when you change the SAN
size. You may increase these values.
4. Click OK on the confirmation message.