DCFM Enterprise User Manual (53-1001775-01, June 2010)

100 DCFM Enterprise User Manual

53-1001775-01

Server port

You can configure the server port settings so that you can assign a web server port number and set

the server port to be SSL-enabled.

Configuring the server port

To configure server settings, complete the following steps.

1. Select Server > Options.

The Options dialog box displays (Figure 45).

FIGURE 45 Options dialog box (Server Port option)

2. Select Server Port in the Category list.

3. Select the Enable SSL check box to enable this function for the server port.

4. Enter a port number in the Web Server Port # field.

NOTE

Do not use port 2638 for any of these port numbers. Port 2638 is used internally by the server.

5. Enter a port number in the Starting Port # field.

The server requires 13 consecutive free ports beginning with the starting port number.