DCFM Enterprise User Manual (53-1001775-01, June 2010)

DCFM Enterprise User Manual 145
53-1001775-01
Launching HCM Agent
6
Launching HCM Agent
Use Brocade HCM Agent to enable and manage Brocade HBAs. You can open HCM Agent directly
from the application. For more information about HCM Agent, refer to the Brocade HCM Agent
Administrator’s Guide. For more information about Brocade HBAs, refer to the documentation for
the specific device.
To launch a device’s Element Manager, complete the following steps.
NOTE
You must have Device Administration privileges for the selected device to launch HCM Agent. If you
do not have Device Administration privileges, you will need to enter those credentials to launch HCM
Agent.
On the Connectivity Map, double-click the Brocade HBA or CNA device you want to manage.
HCM Agent displays.
OR
On the Connectivity Map, right-click the Brocade HBA or CNA device you want to manage and select
Element Manager > Hardware.
HCM Agent displays.
OR
1. Select a Brocade HBA or CNA.
2. Select Configure > Element Manager > Hardware.
HCM Agent displays.
OR
1. Select a Brocade HBA or CNA device.
2. Click the Element Manager icon on the toolbar.
HCM Agent displays.