DCFM Enterprise User Manual (53-1001775-01, June 2010)

160 DCFM Enterprise User Manual
53-1001775-01
Configuring a Radius server
7
1. Select the Authentication tab (Figure 68).
FIGURE 68 Authentication tab
2. For Primary Authentication, select Radius Server.
3. Click Add.
The Add or Edit Radius Server dialog box displays (Figure 69).
FIGURE 69 Add or Edit Radius Server
4. Enter the radius server’s IP address in the IP Address field.
5. Enter the TCP port used by the Radius server in the TCP Port field.
6. Select the authentication policy (PAP or CHAP) from the Authentication Type field.
7. Enter the shared secret in the Shared Secret and Confirm Secret fields.
8. Enter the timeout timer value (in seconds) that specifies the amount of time to wait between
retries when the server is busy in the Timeout (Sec) field.
9. Enter the number of attempts to be made to reach a server before assuming it is unreachable
in the Attempts field.