DCFM Enterprise User Manual (53-1001775-01, June 2010)

192 DCFM Enterprise User Manual

53-1001775-01

Replicating security configurations

You can replicate an AD/LDAP Server, DCC, IP, RADIUS Server, or SCC security policy.

Right-click a device in the Product List or the Connectivity Map, and select Configuration >

Replicate > Security.

A wizard is launched to guide you through the process.

Device properties

You can customize the device Properties dialog boxes to display only the data you need by adding,

editing, and deleting property labels. You can also edit property fields to change information.

Viewing properties

To view the properties for a device or fabric, complete the following step.

Right-click any product icon and select Properties.

The Properties dialog box displays, with information related to the selected device (such as,

switches, directors, HBAs, trunks, tunnels, and nodes).

Depending on the device type, any of the following port tabs may display:

• FC Ports

• GigE Ports

• IP Ports

• iSCSI Ports

• POM

• Remote Ports

• SFP

• Virtual Sessions Ports

• Virtual FCoE Ports

Depending on the device type, some of the properties listed in the following table may not be

available for all products.

TABLE 10 Device properties

Field/Component Description

Addressing Mode The addressing mode of the switch.

Back to Edge Routing Support Whether back to edge routing is supported.

Bandwidth The bandwidth of the FCIP tunnel.

Capability The node capability.

Compression Whether compression is On or Off for the FCIP tunnel.

Connected Virtual FCoE Port The fabric name, switch name, and virtual FCoE port number of the

connected virtual FCoE port.

Contact The primary contact at the customer site.