DCFM Enterprise User Manual (53-1001775-01, June 2010)

226 DCFM Enterprise User Manual
53-1001775-01
Editing storage array properties
8
2. Select the storage port you want to unassign from the Storage Array list.
3. Click the left arrow button.
The selected storage port is removed from the Storage Array list and added to the Storage
Ports table.
4. Make sure the storage port you want to reassign is still selected.
5. Select the storage array to which you want to reassign the storage port in the Storage Array list.
6. Click the right arrow button.
The storage port moves from the Storage Ports table to the selected storage array.
7. Clic k OK to save your work and close the Storage Port Mapping dialog box.
Editing storage array properties
To edit storage array properties, complete the following steps.
1. Open the Storage Port Mapping dialog box by performing one of the following actions:
- Select a storage port icon in the topology view, then select Discover > Storage Port
Mapping.
- Right-click any storage port icon in the topology view and select Storage Port Mapping.
- Right-click any storage port in the Device Tree and select Storage Port Mapping.
The Storage Port Mapping dialog box displays.
2. Select the storage array in the Storage Array list and click Properties.
The Properties dialog box appears.
3. Edit the property fields, as needed.
Depending on which tab you select (Properties tab, Storage tab, Port tab), different fields will
be available for editing. Editable fields have a green triangle in the lower right corner of the
field.
4. Click OK on the Properties dialog box to save the storage array properties.
5. Click OK to save your work and close the Storage Port Mapping dialog box.
Deleting a storage array
To delete a storage array, complete the following steps.
1. Open the Storage Port Mapping dialog box by performing one of the following actions:
- Select a storage port icon in the topology view, then select Discover > Storage Port
Mapping.
- Right-click any storage port icon in the topology view and select Storage Port Mapping.
- Right-click any storage port in the Device Tree and select Storage Port Mapping.
The Storage Port Mapping dialog box displays.
2. Select a storage array in the Storage Array list.