DCFM Enterprise User Manual (53-1001775-01, June 2010)

408 DCFM Enterprise User Manual
53-1001775-01
Deleting FCIP tunnels
16
Deleting FCIP tunnels
1. From the FCIP Tunnels dialog box, right-click the tunnel you want to delete.
2. Select the Delete Tunnel button.
A confirmation dialog box displays, warning you of the consequences of deleting a tunnel.
3. Click OK to delete the tunnel.
Disabling FCIP circuits
1. From the FCIP Tunnels dialog box, right-click the tunnel that contains the circuit.
2. Select the Circuit tab.
3. Select the circuit from the circuit properties table.
4. Select Disable Circuit.
A confirmation dialog box displays.
5. Click OK to disable the circuit.
Enabling FCIP circuits
1. From the FCIP Tunnels dialog box, right-click the tunnel that contains the circuit.
2. Select the Circuit tab.
3. Select the circuit from the circuit properties table.
4. Select Enable Circuit.
A confirmation dialog box displays.
5. Click OK to enable the circuit.
Deleting FCIP Circuits
1. From the FCIP Tunnels dialog box, right-click the tunnel that contains the circuit.
2. Select the Circuit tab.
3. Select the circuit from the circuit properties table.
4. Select Delete Circuit.
A confirmation dialog box displays, warning you of the consequences of deleting a circuit.
5. Click OK to delete the circuit.