DCFM Enterprise User Manual (53-1001775-01, June 2010)

DCFM Enterprise User Manual 449
53-1001775-01
Assigning an LLDP profile to a port or ports in a LAG
17
FIGURE 185 Assign an LLDP profile dialog box
4. Click Assign an LLDP profile to <port name> button to enable the feature.
NOTE
Assign the Global Configuration is the default. The Available Profiles list is disabled if global
configuration is selected. In addition, the Assign an LLDP profile button is disabled if no LLDP
profiles exist on the switch.
5. Select an LLDP profile from the Available Profiles list.
6. Click OK.
The CEE Confirmation and Status dialog box displays.
7. Review the changes carefully before you accept them. The port you selected on the CEE
Configuration dialog box should now be assigned to the profile you selected from the Available
Profiles list.
8. Click Start to apply the changes, or click Close to abort the operation.