DCFM Enterprise User Manual (53-1001775-01, June 2010)

DCFM Enterprise User Manual 453
53-1001775-01
Deleting an ACL
17
Deleting an ACL
When you delete an ACL from the ACLs table, you are given the option to also remove the profile
from the entities where it is currently associated.
1. Select Configure > Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select a switch, and click Edit.
3. Click the Access Control List tab on the Edit Switch dialog box.
The Access Control List dialog box displays.
4. Select the ACL that you want to delete from the ACLs table.
5. Click Delete.
The selected ACL is removed from the ACLs table.
6. Click OK to commit the ACL parameter changes.
The CEE Confirmation and Status dialog box displays.
7. Review the changes carefully before you accept them.
8. Click Start to apply the changes, or click Close to abort the operation.
Assigning an ACL to a port or link aggregation group
An access control list (ACL) cannot be assigned to a port when the port is a member of a link
aggregation group (LAG). An ACL can be assigned to a LAG, however.
NOTE
The ports and the ports in a link aggregation group (LAG) for the selected switch must be in Layer 2
(L2) mode. If the ports or ports in a LAG are not in L2 mode, a yellow banner displays.
1. Select Configure > Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select a port or LAG, and click Edit.
3. Click the Access Control List tab on the Edit Port/Edit LAG dialog box.
The Access Control List dialog box displays.
4. Click the Assign Access Control List to <port name> checkbox.
You can unassign an ACL by deselecting the Assign an ACL to <port_name> checkbox.