DCFM Enterprise User Manual (53-1001775-01, June 2010)

DCFM Enterprise User Manual 461
53-1001775-01
Disabling 802.1x
17
Disabling 802.1x
1. Select Configure > Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select a switch and click Edit.
3. Click the 802.1x tab on the Edit Switch dialog box.
The 802.1x dialog box displays.
4. Clear the Enable 802.1x check box to disable 802.1x authentication.
5. Click OK.
The CEE Confirmation and Status dialog box displays.
6. Review the changes carefully before you accept them.
7. Clic k Start to apply the changes, or click Close to abort the operation.
Setting 802.1x parameters for a switch
The 802.1x parameters can be configured whether the feature is enabled on the switch. The
default parameters are initially populated when 802.1x is enabled, but you can change the default
values as required.
1. Select Configure > Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select a switch and click Edit.
3. Click the 802.1x tab on the Edit Switch dialog box.
The Enable 802.1x dialog box displays.