DCFM Enterprise User Manual (53-1001775-01, June 2010)

464 DCFM Enterprise User Manual

53-1001775-01

CEE switch management using Telnet

You can use Telnet to log in and issue command line-based commands to a CEE switch.

To launch a Telnet session, complete the following steps:

1. Launch the CEE Configuration dialog box using one of the following methods:

• Select Configure > Switch > CEE from the menu bar.

• Right-click the CEE switch from the device tree, and select Configure > CEE.

• Right-click the CEE switch from the topology map and select Configure > CEE.

The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and

functions.

2. Select the CEE switch.

3. Click Telnet.

The Telnet session window displays.

NOTE

On Linux systems, you must use CTRL + BACKSPACE to delete text in the Telnet session

window.

Virtual FCoE port configuration

The virtual FCoE port has the following configuration features:

• Eight 10-Gbps CEE ports, which can be enabled for FCoE traffic.

• One-to-one mapping of FCoE ports with 10 Gbps Ethernet ports.

• Eight 8 Gbps FC ports.

• 24 internal FCoE ports, which provide the Ethernet-to-FC bridging capability. You can enable or

disable each FCoE trunk individually.

• Each of the FCoE ports can be configured as an E_Port or an F_Port.