DCFM Enterprise User Manual (53-1001775-01, June 2010)

DCFM Enterprise User Manual 465

53-1001775-01

Viewing virtual FCoE ports

Configuration of virtual FCoE ports requires installation of the FCoE license on the switch.

1. Select Configure > Switch > FCoE from the menu bar.

The FCoE Configuration dialog box displays.

2. Select the Virtual FCoE Ports tab.

The Virtual FCoE Ports tab displays.

FIGURE 194 Virtual FCoE Ports dialog box

3. Select one or more virtual ports from the Products/Ports list.

4. Perform one of the following tasks:

• Click Enable to enable a selected virtual FCoE port for CEE configuration.

• Click Disable to disable a selected virtual FCoE port from CEE configuration.

• Click Connected Devices to view a list of FCoE virtual ports and to what they are directly

connected.

5. Click Close to close the dialog box.