DCFM Enterprise User Manual (53-1001775-01, June 2010)

DCFM Enterprise User Manual 523

53-1001775-01

Gathering information

2. Copy exactly the user name and password used when creating the TEMS client.

You may create different credentials, but if you do, you also need to change the TEMS client

credentials to match the new credentials.

3. Click OK.

Gathering information

Before you use the encryption setup wizard for the first time, you should also have a detailed

configuration plan in place and available for reference. The encryption setup wizard assumes the

following:

• You have a plan in place to organize encryption devices into encryption groups.

• If you want redundancy and high availability in your implementation you have a plan to create

high availability (HA) clusters of two encryption switches or blades to provide failover support.

• All switches in the planned encryption group are interconnected on an I/O synch LAN.

• The management ports on all encryption switches and 384-port Backbone Chassis CPs that

have encryption blades installed have a LAN connection to the SAN management program, and

are available for discovery.

• A supported key management appliance is connected on the same LAN as the encryption

switches, 384-port Backbone Chassis CPs, and the SAN Management program.

• An external host is available on the LAN to facilitate certificate exchange.

• Switch KAC certificates have been signed by a Certificate Authority (CA), and stored in a known

location.

• Key management system (key vault) certificates have been obtained and stored in a known

location.