DCFM Enterprise User Manual (53-1001775-01, June 2010)

DCFM Enterprise User Manual 565
53-1001775-01
Restoring a master key from a file
20
Restoring a master key from a file
Use the following procedure to restore the master key from a file.
1. Select Configure > Encryption from the menu bar.
The Encryption Center dialog box displays.
2. Select an encryption group from the tree, and click Properties.
3. Select the Security tab.
4. Select Restore Master Key as the Master Key Action.
The Restore Master Key for Encryption Group dialog box displays.
FIGURE 252 Select a Master Key to Restore (from file) dialog box
5. Choose the active or alternate master key for restoration, as appropriate. Refer to “Active
master key” on page 559 and “Alternate master key” on page 559 if you need more
information on active and alternate master keys.
6. Select File as the Restore From location.
7. Enter a file name, or browse to the desired location.
8. Enter the passphrase. The passphrase that was used to back up the master key must be used
to restore the master key.
9. Click OK.