DCFM Professional Plus User Manual (53-1001774-01, June 2010)

356 DCFM Professional Plus User Manual
53-1001774-01
15
Creating a CEE map to carry the LAN and SAN traffic
To create a CEE map to carry the LAN and SAN traffic, complete the following steps.
1. Select Configure > Switch > CEE.
The CEE Configuration dialog box displays.
2. Select the switch to edit in the CEE Ports and LAGs table and click Edit.
The CEE Edit Switch dialog box displays.
3. Click the QOS tab.
The CEE Edit Switch - QoS tab dialog box displays
FIGURE 107 CEE Edit Switch dialog box - QOS tab
4. Use “Creating a CEE map” on page 374 to create a new CEE Map to carry the traffic types, as
shown in the dialog box above.
5. Click Close on the CEE Configuration dialog box.