DCFM Professional Plus User Manual (53-1001774-01, June 2010)

362 DCFM Professional Plus User Manual
53-1001774-01
15
Link aggregation groups
Link aggregation, based on the IEEE 802.3ad protocol, is a mechanism to bundle several physical
ports together to form a single logical channel or trunk. The collection of ports is called a link
aggregation group (LAG). LAG configuration is not supported on internal ports.
The Add LAG button is enabled when a single CEE switch or ports of a single CEE switch are
selected. The Add LAG button is disabled when multiple switches are selected, ports from different
switches are selected, or LAGs are selected.
The Edit button is enabled when a single LAG, port, or switch is selected.
NOTE
When LLDP-DCBX, Access Control List (ACL), or Spanning Tree Protocol (STP) is disabled on the
switch, a yellow banner displays on the dialog box, indicating that LLDP-DCBX, ACL, or STP is not only
disabled on the switch, it is also disabled for all ports and LAGs on the switch.
Adding a LAG
You manage port selection using the Add LAG dialog.
NOTE
An internal port cannot be part of a LAG. You can create LAGs with external ports only.
1. Select Configure > Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select the CEE switch or one or more CEE ports to add to a link aggregation group (LAG).
3. Click Add LAG.
The Add LAG dialog box displays.