DCFM Professional Plus User Manual (53-1001774-01, June 2010)

DCFM Professional Plus User Manual 377
53-1001774-01
15
Deleting a CEE map
You cannot delete the CEE map of a 10 Gbps CEE/FC switch module.
1. Select Configure > Switch > CEE from the menu bar.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
2. Select a switch, and click Edit.
3. Click the QoS tab on the Edit Switch dialog box.
The QoS dialog box displays.
4. Select a CEE Map that you want to delete from the CEE Maps table.
5. Click Delete.
The Delete confirmation dialog displays.
6. Click Yes to confirm.
The CEE Map row is removed from the table.
7. Click OK.
The CEE Confirmation and Status dialog box displays.
8. Review the changes carefully before you accept them.
9. Click Start to apply the changes, or click Close to abort the operation.
If a CEE map is assigned to a port or LAG and you delete the CEE map, an error message
displays in the Status area (applicable for the Traffic class map and ACL).