DCFM Professional Plus User Manual (53-1001774-01, June 2010)

DCFM Professional Plus User Manual 39
53-1001774-01
2
NOTE
When you discovers Virtual Fabric-enabled switch with the SNMP v3 username “admin”,
which is the same as the Fabric OS switch user, the Management application
automatically creates an SNMP username “admin” in the switch by replacing the sixth
username.
10. Specify the Read option by selecting Default ‘public’ or Custom.
11. If you selected Custom, enter the community string in the Custom and Confirm Custom fields.
12. Specify the Write option by selecting Default ‘private’ or Custom.
13. If you selected Custom, enter the community string in the Custom and Confirm Custom fields.
Go to step 21.
14. If you are configuring a 256-port director, select the Configure for 256-Port_Director_Name
check box.
• If you selected Configure for 256-Port_Director_Name, go to step 18.
• If you did not select Configure for 256-Port_Director_Name, continue with step 15.
FIGURE 21 Address Properties dialog box (SNMP Tab - v3)
15. Enter a user name in the User Name field.
16. Enter a context name In the Context Name field.
17. Select the authorization protocol in the Auth Protocol field.
18. Enter the authorization password in the Auth Password field.
• If you selected Configure for 256-Port_Director_Name, go to step 21.
• If you did not select Configure for 256-Port_Director_Name, continue with step 19.
19. Select the privacy protocol in the Priv Protocol field.
20. Enter the privacy password in the Priv Password field.
21. Click OK on the Address Properties dialog box.
If the seed switch is partitioned, the Undiscovered Seed Switches dialog box displays.
a. Select the Select check box for each undiscovered seed switch to discover their fabrics.
b. Click OK on the Undiscovered Seed Switches dialog box.
22. Repeat step 2 through step 21 for each fabric you want to discover.