Fabric OS Encryption Administrator's Guide v6.4.0 (53-1001864-01, June 2010)

120 Fabric OS Encryption Administrator’s Guide

53-1001864-01

Zoning considerations

7. Create a zone that includes the initiator and a LUN target. Enter the zonecreate command

followed by a zone name, the initiator PWWN and the target PWWN.

FabricAdmin:switch>zonecreate itzone, "10:00:00:00:c9:2b:c9:3a; \

20:0c:00:06:2b:0f:72:6d"

8. Create a zone configuration that includes the zone you created in step 4. Enter the cfgcreate

command followed by a configuration name and the zone member name.

FabricAdmin:switch>cfgcreate itcfg, itzone

9. Enable the zone configuration.

FabricAdmin:switch>cfgenable itcfg

You are about to enable a new zoning configuration.

This action will replace the old zoning configuration with the

current configuration selected.

Do you want to enable 'itcfg' configuration (yes, y, no, n): [no] y

zone config"itcfg" is in effect

Updating flash ...