fw 05.01.00 and sw 07.01.00 edge switch 2/24 product manager user guide

Product Manager Messages
192 Edge Switch 2/24 Product Manager User Guide
Invalid configuration
name.
Attempted to save an
address configuration
name with an invalid
name.
Use up to 24 alphanumeric
characters, including
spaces, hyphens and
underscores.
Invalid feature key. The feature key was not
recognized.
Re-enter the feature key
noting the key is
case-sensitive and to
include the dashes.
Invalid firmware file. Selected file is not a
firmware file.
Select the correct firmware
file.
Invalid network address. Network address
specified is not known by
the domain name server.
Check the input address
and specify the correct
network address.
Invalid port number. Port number must be
within the range of ports
for the specific switch
model.
Enter a port number within
the correct range.
Invalid port number.
Valid ports are (0 - 23).
Port number must be
within the range of ports
for the specific switch
model. For this model,
the valid port numbers
are 0 - 23.
Enter a port number within
the correct range.
Invalid port swap. Port swap selection is not
allowed.
Ensure that each port
selected for swap has not
been previously swapped.
Invalid response received
from switch.
The switch returned an
invalid response.
Resend the firmware. If the
condition persists, contact
support personnel.
Invalid serial number for
this feature key.
The serial number and
the feature key did not
match.
Ensure that the feature key
being installed is
specifically for this switch
serial number.
Invalid UDP port number. UDP port number must
be an integer from 1
through 65535.
Enter a port number from 1
through 65535.
Invalid value for
BB_Credit.
BB_Credit must be an
integer from 1 through
60.
Enter a number from 1
through 60.
Table 5: StorageWorks Edge Switch 2/24 Product Manager Messages (Continued)
Message Description Action